SERVICE INFO AND SCHEMATICS FOR DJ Disclite MKII

DJ Electronics produced some excelent and professional equipment that was both technical and robust. The design and build quality was one of the key attributes of this manufacturer. The early designs were the best and the company struggled during the latter boom period of the 70's , being taken over I think by Saxon. This lighting controller gives 'sound to light' performance, that is the lamp brightness is affected by volume and which lamp is lit is affected by frequency. This is a 3 channel design. For specs click HERE.
 
Front Panel - DJ Disclite mkII
Schematic for DJ Disclite mkII
Above left is the front panel layout. This was also available in an anodised black finish. to the right is the circuit diagram of the unit. The placement of components on the page has been arranged to reasonably match the physical location of that part on the printed circuit board. To view the image full size, click the image. The electronics are housed in a 'u' shaped section attached to the front panel, this has an aloy rear panel with power inlet cable, audio input jack socket and 3 bulgin 3pin mains connectors for channel outputs. The three indicators are 240v neons, the rotary control also has a dpco switch, bothe switches are dpco types. There is a perforated cover to this section which is all similar to the DJ disclite 32L shown elsewhere on this website.
PCB Copper Foil
pcb component side
PCB. Click for bigger picture Shown Left is an assembled replacement pcb made in the early 80's to repair a burned out unit. Never used but presented here as a sample to show component placement. Note the alloy angle used to bolt the assy to the base and provide a heat sink. Also note the 5Amp fuse wire soldered into the pcb next to each triac...a cost cutting and possibly safety feature.
.Links Page...Links here to interesting sites or pages on the web with related subject matter.
A note about copywrite......I have tried to find publishers or anyone i can get, but some of this content is very old now. If you see your work here and it's an issue, contact me. I will either change, acknowledge or remove it.
 

Copyright © M.Ginda 2010

 Page Updated 10 Jan 2010